Plastic

Plastics
Material	Full name of material	Shrinkage (%)	Material characteristics and Application
ABS	Acrylonitrile-Butadiene-Styrene	0.4~0.7%	It has certain toughness, surface gloss, super machinability, appearance characteristics, low creep, excellent dimensional stability and high impact strength. There are more than 100 different grades. According to different material grades, there are different changes in performance. One kind of engineering plastics is widely used.
ABS-FR	Acrylonitrile-Butadiene-Styrene（Flame retardant）	0.3~0.8%	It has the flame retardant property. After modification, its own characteristics are weakened, and its fluidity is increased. It is easy to decompose and carbonize. It is mostly used in the shell of electrical products.
ABS+GF	Acrylonitrile-Butadiene-Styrene+Glassfiber	0.2~0.4%	Glass fiber reinforced material, the strength and toughness of the material are solidified and increased, the fluidity is weakened, the internal stress becomes larger, used for the formation of wear resistance, corrosion resistance products.
ABS+PC	Acrylonitrile-Butadiene-Styrene+Polycarbonate	0.5-0.9%	Alloy materials (also have their own ratio according to need), the toughness, strength, bending resistance of PC performance, while improving the fluidity of the material through ABS, surface gloss, mostly used in mobile phone shell, mobile phone battery, electrical shell, electrical parts, auto parts, etc..
PA6	Polyamide6	0.8~2.5%	It has certain toughness, good fluidity of the material, good impact strength, strong corrosion resistance, good mechanical strength and wear resistance, and is also used for manufacturing bearings. The material has strong water absorption, so it must be kept dry and the contact surface with air must be reduced. In the early stage of mold development, attention must be paid to the parting surface and the exhaust groove of the slider.
PA6+GF	Polyamide6+Glassfiber	0.4~0.6%	Glassfiber reinforced material, the toughness strength of the material is consolidated, the fluidity is reduced, but the surface glass fiber will be obvious, easy to decompose under high temperature, used for internal wear-resistant parts forming.
PA12	Polyamide12	0.5~2%	Widely used in water gauges and other commercial equipment, cable sleeves, mechanical cams, sliding mechanisms and bearings. It has certain toughness, good fluidity of the material, good impact strength, strong corrosion resistance, and easy decomposition of the material at high temperature.
PA12+GF	Polyamide12+Glassfiber	0.5~1%	Glassfiber reinforced material, the toughness strength of the material is consolidated, the fluidity of the material is reduced, but the surface glass fiber will be obvious, easy to decompose at high temperature.
PA66	Polyamide66	1.5~2.2%	Compared with PA6, it is widely used in automobile industry, instrument housing and other products requiring impact resistance and high strength. The toughness is strengthened, the fluidity is slightly reduced, the impact strength is good, the corrosion resistance is strong, and the cold resistance is strong.
PA66+GF	Polyamide66+Glassfiber	0.50%	Glassfiber reinforced material, the toughness strength and impact strength of the material are consolidated, the fluidity is reduced, but the surface glass fiber will be obvious, easy to decompose under high temperature.
PBT	Polybutylene Terephthalate	1.5%~2.8%	Widely used in household appliances, electrical components, automobile industry, etc. It has certain toughness, hardness, good fluidity, good flame retardant, high mechanical strength, excellent chemical resistance, easy deformation, and later is known as the fifth engineering plastics.
PBT+GF	Polybutylene Terephthalate+Glassfiber		Glassfiber reinforced material, toughness, mechanical strength, chemical resistance, etc. are optimized, fluidity is reduced, and deformation is reduced.
PC	Polycarbonate	0.5~0.7%	Widely used in electrical and commercial equipment, appliances, transportation industry, etc. With strong toughness, high hardness, weak light transmittance, poor liquidity, because of good performance, widely used, commonly known as bulletproof glue, a kind of engineering plastic, transparent material is also used for mirror body forming.
PC+GF	Polycarbonate+Glassfiber	0.1~0.5%	Its strength and toughness, hardness have been fully developed, and has a strong corrosion resistance, in practical application can replace most of the metal parts.
PC+PBT	Polycarbonate+Polybutylene Terephthalate	1.5%~2.8%	Used for gear boxes, automobile bumpers and products requiring chemical reaction resistance, corrosion resistance, thermal stability, impact resistance and wearing parts, high and low temperature resistance. Neutralize the advantages and disadvantages of both, the strength and toughness of PC and the hardness and mechanical properties of PBT are brought into play.
PEI	Polyetherimide	0.6%	Used in automobile industry, electrical and electronic equipment, product packaging, aircraft internal equipment, pharmaceutical industry, etc. Strong toughness, strength, good mechanical properties, corrosion resistance, high insulation, can replace part of the metal forming.
PEI+GF	Polyetherimide+Glassfiber	0.2~0.4%	The toughness, strength and mechanical properties of glass fiber are enhanced after reinforcement, and the surface glass fiber deposition needs to be improved by high mold temperature, which is mainly used for the forming of internal functional parts of electrical appliances.
PET	Polyethylene terephthalate	1.2~2.0%	Used in automotive industry, electrical components, industrial applications, etc. It has certain flexibility, strength and good mechanical properties. It is easy to decompose and carbonize at high temperature. It is mainly used for forming internal parts and external vulnerable parts of electrical appliances.
PET+GF	Polyethylene terephthalate+Glassfiber		Glassfiber reinforced material, its flexibility, mechanical properties have been strengthened, easy to decompose carbonization under high temperature, mostly used in electrical internal parts, external wearing parts of the formation.
PMMA	Polymethyl methacrylate	0.6%	With toughness, strong transmittance, white light transmittance up to 92%, is the best transmittance of all transparent materials, commonly known as sub afterforce, plexiglass, widely used in mirror, optical disc and other forming. Because of the high hardness of screw wear, forming as far as possible to use special screw.
POM	Poly Oxymethylene Polyacetal	2.2~2.5%	With very low friction coefficient and good geometric stability, especially suitable for making gears and bearings. Because of its high temperature resistance, it is also used in pipe devices, lawn equipment, etc. Easy to decompose at high temperature, because of its high hardness, commonly known as match steel.
POM+GF	Poly Oxymethylene Polyacetal+Glassfiber	1.3~2.8%	Glassfiber reinforced material, the advantages of the material has been solidified and increased, reduced fluidity, easy decomposition, easy carbonization, can replace part of the metal forming.
PP	Polypropylene	1~1.25%	With strong flexibility, good viscosity, good liquidity, high stability, because there will be no degradation at high temperature, unmodified PP for screw cleaning, commonly known as 100 fold adhesive.
PP+GF	Polypropylene+Glassfiber	0.2~0.8%	The viscosity, fluidity and stability of the modified material are reduced, and the toughness is enhanced. It will not degrade for a long time at high temperature.
PPE	Phenylene Ether	1~2.5%	Used for household goods, electrical equipment, etc. Has a certain toughness, strength, good mechanical properties, not easy to decompose under high temperature. The mixed material with PA 66 has greater chemical stability at high temperatures. This material has very little moisture absorption and its products have excellent geometric stability. The material mixed with PS is non-crystalline, while the material mixed with PA is crystalline. The addition of glass fiber additive can reduce shrinkage to 0.2%.
PS	Polystyrene	0.3~0.6%	Used in product packaging, household goods, toys, electrical equipment, etc., including GPPS and HIPS. The material performance is reflected in two limits of flexibility and hardness. It is the most widely used plastic for civil use. In production, the ratio is carried out according to the needs, and GPPS improved SAN can be used to replace PMMA.
PS-FR	Polystyrene（Flame retardant）	0.3~0.5%	After increasing the flame retardant performance, the material performance changes, easy to decompose, easy to carbonize, corrosive, mostly used in electrical products shell.
PVC	Polyvinyl chloride	0.2~0.6%	Used for water supply pipe, household pipe, housing wall panel, commercial machine shell, electronic product packaging, medical equipment, food packaging, etc. The material has non-flammability, high strength, weather resistance and excellent geometric stability, good fluidity and flexibility. From 0 degrees to 100 degrees, depending on the density, the higher the density, the higher the hardness.
AS	Acrylonitrile-Styrene Copolymer	0.4~0.6%	Used in electric, daily commodity, automobile industry, household goods, cosmetic packaging, etc. Transparency is second only to PMMA, higher than PC, ABS, GPPS, compared with PMMA hardness reduction, increased fluidity, reduce the wear of the screw, the user is mostly used to replace PMMA material.
PPS	Polyphenylene Sulfide	1%	Good chemical resistance, special rigidity, poor toughness, low impact strength, dissolved colloid instability, mostly used for the forming of internal functional parts.
PEEK	Polyetheretherketone	1.5~1.6%	It has the advantages of high temperature resistance, corrosion resistance, wear resistance, high strength and low noise, because its excellent mechanical properties can replace metal, and is mostly used for wear-resistant gear forming.
PPA	Polyphthalamide	0.4~0.6%	High temperature resistance, corrosion resistance, excellent wear resistance, good mechanical, shrinkage performance, high temperature decomposition resistance, can replace part of the metal accessories.
TPE	Themoplasticelastomer	1.5~3%	Good transparency, flexibility and relatively low price, with broad design space. Transparent series is applied to high transparency toys, adult products, materials for suction cups, sports equipment and sealing rings.
TPU	Thermoplastic Urethane	0.8~3%	By changing the ratio of each reaction component of TPU, products with different hardness can be obtained, and with the increase of hardness, the products still maintain good elasticity. TPU products have outstanding bearing capacity, impact resistance and shock absorption performance. The glass state transition temperature of TPU is relatively low, and it still maintains good elasticity, flexibility and other physical properties at minus 35 degrees Celsius.